General Description
The CMV50000 is a high speed CMOS image sensor with 7920 × 6004 effective pixels (47.5Mp)
developed for machine vision and video applications. The image array consists of 4.6μm pipelined 8T
global shutter pixels which allow exposure during read out, while performing true CDS (Correlated
Double Sampling) operation. The image sensor also integrates a programmable analog gain amplifier
and offset regulation. The image sensor has 22 digital sub-LVDS data output channels. Each output
channel runs up to 830 Mbit/s, which results in a frame rate of 30 fps at full resolution. Higher frame
rates can be achieved in row-windowing mode or row-subsampling mode. These modes are all
programmable using the SPI interface. All internal exposure and read out timings are generated by a
programmable on-chip sequencer. External triggering and exposure programming is also possible.
Extended optical dynamic range can be achieved by a dual exposure HDR mode.
Applications
● Machine vision
● Video/Broadcast
● Security
● High-end inspection
● Aerial mapping
● Document scanning
● ITS
● Scientific
● 3D imaging
Features
Resolution of 7920 × 6004 at 30 frames per
second
8T global shutter pixel with true Correlated
Double Sampling (true-CDS)
Low noise (8.8e) and high sensitivity (QE=60%),
with on-chip noise reduction.
In binning mode the full well capacity reaches
58000e- with an SNR of 47.6dB and DR=68dB
35 mm Full Frame optical format
On-chip digital sequencer which handles all the
sensor controls, over SPI